F61 error in Gorenje washing machine

Error F61 appears when the drum rotation speed during the spin cycle is lower than usual. The peculiarity of this error is that it is not displayed in the wash mode. To identify deviations in the speed of rotation of the drum, you need to run a verification test. If a discrepancy with the norm is detected by more than 100 rpm, after the test is completed, the display will show the code F61.

In order to identify the cause of the breakdown and eliminate it, contact qualified service center mechanic. They will diagnose, identify the source of the problem, and repair the car. Please note that not in all cases it is possible to restore the work on your own, so contact the specialists so as not to aggravate the problem.

Self-troubleshooting

Most often, the machine starts to rotate the drum more slowly due to problems with the motor. Jamming of the drum itself may also occur because a foreign body has got into it. In some cases, the problem lies in a faulty electronic control module.

To fix the breakdown, do the following:

• Check the drum belt. If he slept, he needs to be put on again. Replace damaged belt.
• Rotate the drum first in one direction, and then in the other. If there is a blockage due to a foreign body, it must be removed.
• Run engine diagnostics. Make sure that the tach generator and windings are in order. If a problem is found, fix it.

If the above actions did not bring the desired result, you need to check the electronic controller. To do this, it is better to contact a service center, since special knowledge of electronics is required for replacement.

If you have any questions or want to call the mechanic, call us (order a call back).