F31 error in Gorenje washing machine

Error code F31 for Gorenje WA-101/121/132/162/162P washing machines is displayed on the electronic display at the moment when the drum stops, and the washing process is interrupted. The system is designed in such a way that after a problem occurs, the machine will independently try to restart twice. If this fails within four minutes, an error will be displayed.

To find out what is the reason, contact a qualified service center. They will diagnose and replace damaged parts so you can use your laundry machine again.

Independent problem solving

Most often, error F31 is displayed on the display when the tach generator (Hall sensor) breaks down or the electrical wiring that conducts signals from the sensor to the electronic board is damaged. The circuit breaks and no signals are sent to the control room. The motor stops and the drum does not spin. Follow the steps below to repair the machine.

• Ring the electrical wiring coming from the tachometer. Replace all damaged areas, resolder oxidized contacts.
• Examine the tach generator.If it is broken, replace it with a new one.

If you checked the Hall sensor and wiring, and they are in order, the control unit may be the cause. The electronic module fails due to fluctuations in the electrical network. It needs to be reprogrammed or replaced with burned-out sections. This is a complex repair, so it must be entrusted to professional mechanic.

If you have any questions or want to call the mechanic, call us (order a call back).