F3 error in Gorenje washing machine
Error code F3 for Gorenje PG1-PG5 washing machines is displayed on the electronic display now when the system fails. The device stops drawing water and stops. It is impossible to wash further because the machine does not start. To find out the cause of the error and eliminate it, contact a qualified service center.
- Disconnect the inlet hose from the washing machine and check the water pressure. If it is small, the machine will not be able to draw the right amount of water.
- There is a filter in front of the filling valve. It can become clogged with dirt and rust. Pull it out with pliers and clean it under the pressure of water.
- Make sure the water inlet valve is working properly. It can jam and not let water into the system. If necessary, replace it with a new one.
- If there is a lot of water in the tank, and you see error F3 on the display, there may be problems with the pressure switch or its hoses. Check them and, if necessary, replace the damaged pressure switch or hose.
If all the above actions do not resolve the error, the electronic control module may be damaged. To repair it, you need special knowledge, so it's best to contact professional specialists from the service center.
If you have any questions or want to call the mechanic, call us (order a call back).