Error UC, 9C, 9E1, 9E2 in the Samsung washing machine

If the Samsung electronics washing machine shows the error Uc, 9C, 9E1, 9E2 (depending on the model), this is accompanied by a refusal to start washing. It happens that the fault code lights up immediately after water has been drawn in, before switching to spinning, or when selecting a mode with water heating and cotton washing. Errors Uc, 9C, 9E1, 9E2 indicate problems with the power supply in the network. The voltage is either too high or too low. Cars manufactured before 2013 are very sensitive to even minor changes. It happens that the fault code disappears itself after voltage stabilization, and washing continues as usual.

Is it possible to reset on your own?

Before the arrival of the master, it is worth trying to solve the problem yourself. The error is a consequence of such problems:

• voltage failure. In most apartments and houses, this happens temporarily, so you don't need to do anything, everything will soon recover by itself,
• constantly unstable voltage. If this happens often, you can install a stabilizer,
• problems with the outlet or wiring. They may be damaged and need to be replaced,
• connection through a low-quality extension cord.

Error Uc, 9C, 9E1, 9E2 also happens due to a temporary software failure of the control module. This issue is resolved by rebooting. The machine is disconnected from the network and stays like this for up to 15 minutes, then it turns on again.

What are the breakdowns?

If the cause is not voltage, and after a reboot, the error Uc, 9C, 9E1, 9E2 does not disappear, then the electronic control unit has broken. If individual elements or tracks are burned out, they are restored by soldering. Many parts can be repaired too. In very rare cases, the unit will need to be replaced.

If you have any questions or want to call the mechanic, call us (order a call back)