ERR2 error in Haier washing machine

When an ERR2 error appears on the display of a Haier electronic washing machine, it usually happens in the middle of a cycle. Before or during spinning, or before switching to rinsing, the machine stops unexpectedly or slows down significantly. The display shows a fault code.

Before calling the service center, you need to try to fix the problem yourself. Error ERR2 means that the washing machine cannot drain the water for the required period. The cause may be a clogged drain filter. Just take it off and clean it. Check to see if the drain hose is kinked.

Error ERR2 can also occur due to sewerage problems. They are removed by a plumber. The problem may also be a temporary failure of the control board. It is enough to restart it to correct the situation. To do this, you need to disconnect it from the network, let it stand for 10-15 minutes, and then turn it on again.

What damage can be?

If all the above steps did not help, professional diagnostics will be required. Error ERR2 occurs due to such malfunctions:

• Clogging of the drain tract,
• Failure of the drain pump,
• Damage to wiring or contacts,
• Control board failure (rare).

If you have any questions or want to call the mechanic, call us (order a call back).