When the ERR10 error appears on the display of the Haier electronic washing machine, this is accompanied by incorrect program execution. The unit freezes a few minutes after the start of the cycle or in the middle, when water begins to fill or drain. The machine does not respond to pressing the buttons, it knocks out a fault code.
Before the arrival of the master, you need to try to fix the problem yourself. Error ERR10 means that the washer is taking in too much water, and it is much more than the permissible level in the tank. The reason may be a temporary one-time failure of the control board. It is enough to restart the module to correct the situation. To do this, the washing machine must be disconnected from the mains, let it stand for 10-15 minutes, and then turn it on again.
If, after a reboot, the ERR10 error does not disappear, this indicates a serious malfunction - failure of the pressure switch or water level sensor. If the cause is not damage to the wiring, then you need to replace it. Rarely, but the problem may be a malfunction of the control module.
If you have any questions or want to call the mechanic, call us (order a call back).