When error E50 appears on the display of the Electrolux electronic washing machine, this is accompanied by the failure of the unit to start washing. This code usually knocks out immediately after turning it on, setting all the parameters and pressing the start button. Water is drawn in as usual, but the drum does not spin. It may be that it makes several revolutions and freezes, stops immediately after a set of high revolutions or before spinning. Error E50 means that there have been problems in the engine chain. In most cases, you need to call the wizard, although it will be possible to deal with some situations on your own.
The problem may be low voltage in the network. If this is true, then you need to put a special relay or contact an electrician. In this case, the breakdown has nothing to do with the washing machine itself. Error E50 may also appear due to a one-time failure of the control module. Most often this happens due to voltage fluctuations. This problem is solved by restarting the washing machine. It must be disconnected from the network, let it stand for 10-15 minutes, and then start again.
If, after a reboot, the E50 error still lights up, this indicates several malfunctions that require professional intervention.
|How to eliminate
|Water is collected, but there is no rotation of the drum.
|Failure of the triac due to a short circuit.
|Installing a new triac.
|The drum rotates in one direction, then stops.
|Breakage of the reverse relay of the control board.
|Water is collected, there is no rotation, it knocks out an error.
|Burnout of controller elements.
|Soldering tracks or installing a new controller.
|The drum does not move at all or freezes when gaining speed, sparks appear.
|Engine brush wear.
|Motor brush replacement.
|Noise while washing machine. Spin does not start. The drum is not spinning.
|Destruction of bearings and stuffing box.
|Installing new bearings.
|The drum does not rotate.
|Damage or breakage of the tachometer.
|Restoration or replacement of the tachometer.
|Damaged wiring / contacts.
|Restoration or installation of new wiring / contacts.
If you have any questions or want to call the mechanic, call us (order a call back).