E23 error in Electrolux washing machine

When error E23 appears on the display of the Electrolux electronic washing machine, this is accompanied by the fact that the process freezes a few minutes after the start or in the middle of execution. This DTC means that there is a drain problem. He reports problems with the triac - they provoke the incorrect operation of the unit.

When an error E23 appears, you must immediately call the wizard. It will not work to cope with a burned-out triac, which is responsible for the operation of the pump, on your own. Upon arrival, the specialist will diagnose the control board. A broken triac must be replaced.

Can I reset myself?

Error E20 is not always a direct consequence of a breakdown. If it appears, the first step is to check the drain filter. Perhaps he got pissed off. Then it is enough just to clean it to eliminate the error. It could also be that the drain hose is kinked or kinked. If you straighten it, the water will drain again, as usual.

If everything is in order in this part, the sewer may be clogged. This happens if the washer is connected to the sink siphon. An experienced plumber can handle this problem. There is also the possibility of a temporary failure of the control board. It is fixed by reboot. The washing machine is completely disconnected from the mains and stays like this for 10-15 minutes, then starts again.

If you have any questions or want to call the mechanic, call us (order a call back).