Suppose the Samsung washing machine shows the error DE, ED, DOOR, DE1, DE2, DC, DC1, and DC2 (depending on the model), accompanied by the failure of the unit to start washing. Furthermore, after pressing the start button, there is no reaction, and no characteristic click is heard, indicating that the door is blocked. Therefore, the program does not start.
Error DE, ED, DOOR, DE1, DE2, DC, DC1, and DC2 means difficulties closing the door. In most cases, it appears due to a breakdown. Although before the arrival of the mechanic, it is worth trying to solve the problem yourself.
First of all, you need to make sure that the hatch cannot close due to other than physical reasons. The problem may be in clothes stuck between it and the body of the washer. Remove it and close the door again. It is also possible that the contacts extending from the hatch-blocking device to the door have come off. Enough to screw them up.
Error DE, ED, DOOR, DE1, DE2, DC, DC1, and DC2 also occurs due to a temporary software failure of the control module. This issue is resolved by rebooting. However, the machine is disconnected from the network and stays like this for up to 15 minutes. Then it turns on again.
If the error DE, ED, DOOR, DE1, DE2, DC, DC1, DC2 does not disappear after a reboot, it reports the following faults:
|Breaking||Causes||How to eliminate|
|No door lock, washing does not start.||The UBL (blocking device) broke.||Installation of a new UBL.|
|The program has been completed, but the hatch cannot be opened, and laundry can be removed.|
|The error is lit before the start of the cycle.||Failure or software failure of the control module.||Soldering board tracks. Much less often a complete replacement is needed.|
|The door does not slam shut, there is no click.||Loop twist.||Repair or replacement of hinges.|
|The error periodically appears, then disappears.||Damaged wiring / contacts.||Restoration or installation of a completely new cable.|
If you have any questions or want to call the master, call us (order a call back)